養耕共生DIY自動控制 Aquaponic DIY Automation Blog 為求連接5 DS18B20溫度探針並確定所有線路的正確連接took some effort. The fact that a pull-up resistor is required to take readings was an issue for me. I have been using 1/4 watt resistors and in tight spaces my resistor wires kept breaking off. So I needed a way to connect it all up and be protected. Sugru saved the day. Sugru made a strong bond I showed you the end product as that is what most people are interested in. But it is important to understand how the end product was created. Here is the starting point: pull-up resistor configuration Spacing of the wires and resistor is a big issue here, as if the spacing is off the connectors will not fit into the holders correctly. one connection made Next trick was to get 5 connections completed. 5 connections made bend it just right to get correct spacing side view Front view end product Now it is possible to continue testing my DS18B20 temp probes with ...